The Old One - Energy Dynamics : Supercharger Photo Gallery

Supercharger Prototype Photo Gallery Early prototype mock ups on Integra Type-R These pictures are just two of the many many mock-ups to "look at" how to do it best. Then will it perform - then we go from there. T.O.O. have many wooden and plastic parts that are in storage as rejects.
	Early mock-up to proof fit for engine compartment. This design was rejected due to losses in plenum. Notice how the air exiting for the supercharger will need to make a 90 degree turn into the intake ports.
	Another view of the reject... showing the intake ports.
	View of the reject test fitted inside the engine compartment.
	Another view with the throttle body.
	Yet another view of the same reject.
	This is the design ended up being the final 1st configuration. Notice the blower blows directly at the intake port. Very little loss.
	The same prototype... this is the prototype (fitting) piece used for production manifolding.

	About \| Archive \| Articles \| Supercharger \| Components \| BBS \| Contact Us
	Supercharger FAQ and photo gallery

Supercharger Prototype Photo Gallery